skip to Main Content
(952) 401-7700 sales@digitalaudio.com
LIVEMIX MIX-32
LIVEMIX MIX-32
32 mix distributor
MSRP: $3479.00

The MIX-32 is the central mixer for the Livemix personal monitoring system. The MIX-32 supplies mix streams as well as power to each of the connected personal mixers.

The MIX-32 will generally be placed near the personal mixers, likely in a rack near the stage. The MIX-32 receives input data over a network cable, either from the AD-24 (shielded) or a Dante network via the LM-DANTE-EXP Dante card.

Each port on the MIX-32 supports two discrete mixes for up to 32 total mixes. Connect a single CS-DUO or up to two CS-SOLOs to each port with standard network cable. Maximum combined CAT5e cable (shielded or unshielded) distance is 100 meters.

Livemix MIX-32 central mixer distributor for Livemix in-ear monitoring system front image
Livemix MIX-32 central mixer distributor for Livemix in-ear monitoring system front image
Livemix MIX-32 central mixer distributor for Livemix in-ear monitoring system angle image
Livemix MIX-32 central mixer distributor for Livemix in-ear monitoring system back image
Livemix MIX-32 central mixer distributor for Livemix in-ear monitoring system Audinate Dante image
Livemix MIX-32 central mixer distributor for Livemix in-ear monitoring system front imageLivemix MIX-32 central mixer distributor for Livemix in-ear monitoring system angle imageLivemix MIX-32 central mixer distributor for Livemix in-ear monitoring system back imageLivemix MIX-32 central mixer distributor for Livemix in-ear monitoring system Audinate Dante image

FEATURES

  • Livemix personal monitor system with 24 channels of audio

    24 Channel + 4 Accessory Channels

    The MIX-16 receives 24 channels of audio from the AD-24 (for analog sources) or the LM-DANTE-EXP option card (for digital sources from a Dante™ Network). This is more than enough to handle the needs of church, studio, and live event stages while still being simple to use with the intuitive mix interface.

  • Livemix personal monitor system with 24 channels of audio

    24-bit Mixing

    High quality audio processing means mixes come together quicker and easier. Clear separation of instruments with no smearing and accurate sound reproduction make Livemix the best sounding personal monitor mixer on the market. Digital Audio Labs’s decades of experience in digital audio give you the very best sounding mixes possible.

  • Livemix with expansion port icon

    Expansion Port (Option Card)

    With the built-in expansion port, you never have to worry about future compatibility. The audio world is always changing and Livemix will support those changes so you can be assured that your personal monitor system will provide many years of best-in-class functionality.

  • Livemix personal monitor system - In-ear monitor - wireless

    Output to Analog for Transmitters

    Each MIX-16 has an output port for connection to the optional Livemix DA-816 analog output unit. This lets you assign personal monitor mixes to one of 8 stereo outputs for easy wireless in-ear monitor integration.

  • Livemix personal monitor system supports up to 32 personal mixes

    Supports Up to 16 Personal Mixers

    16 front panel ethernet ports provide power and mix capabilities to up to 32 personal monitor mixes. This can be through 16 dual mix CS-DUO units, 32 single mix CS-SOLOs or a combination.

DOWNLOADS

Please visit the Support page for the latest firmware downloads. 

**The Livemix MIX-32 uses open source code. The FreeRTOS source code is available for download here.

LIVEMIX MIX-32
Max Cable Length
to CS-SOLO/CS-DUO
100m CAT5e cable (shielded recommended)
Max Cable Length
to AD-24/DA-816
100m CAT5e cable (shielded required)
Bit Rate 24-bit Digital Mixing and Processing
Sample Rate 48 kHz internal system rate
Up to 96kHz sample rate input accepted from Dante network
Digital Format Proprietary in system
Expansion Option Card Slot
Categories: CSDUO, CSSOLO, Livemix

Both the CS-SOLO and the CS-DUO receive power over the ethernet cables.

Categories: CSDUO, CSSOLO, Livemix

Yes you can, and it it incredible simple. Select the channel within the group that you wish to adjust. A white border will outline the channel to indicate it is selected. LONG PRESS the ADJUST knob to temporarily remove the channel from the group. The white outline of the selected channel will flash while the channel is temporarily out of the goup.  Use the ADJUST knob to adjust the volume of the channel and press the ADJUST knob to return the channel to the group.

Categories: CSDUO, CSSOLO, Livemix

You can connect two CS-SOLO units to a single port on the MIX-16 or MIX-32. The first mixer is the blue “A MIX” while the second unit will be the red “B MIX”. Power and audio is supplied to the second CS-SOLO over a network cable connected to the CS-SOLO THRU port. The CS-DUO must be connected directly to the MIX-16 or MIX-32.

Categories: CSDUO, CSSOLO, Livemix

The CS-DUO has the abiblity to link both the A and B Mixes. Select the A mix, PRESS and HOLD both Master Volume knobs at the same time. Confirm that you want to group the controls. At this point both sets of control knobs will control the mix. Repeat these steps to unlink the mixes.

Categories: CSDUO, CSSOLO, Livemix

The Auxiliary input is designed for an amplified signal such as what is output from a smartphone headphone output. In order to use a microphone with the Aux input, it would need to be used with a microphone preamplifier before the signal gets to the Livemix Aux in.

But as luck would have it, we make just such a device. The LM-MICPRE is a mic preamp that allows you to use a standard dynamic mic as the intercom mic. Check it out here.

Categories: CSDUO, CSSOLO, Livemix

Livemix provides 5 multi-channel groups and the ability to group stereo pairs. If you need to send a subgroup to the Livemix system outside of those groups, you will need to subgroup them on the console and then publish that group to the Dante network.

Categories: CSDUO, CSSOLO, Livemix

While Livemix Data is transmitted over standard network cables, it is not in a format that a network can read. DO NOT use splitters, couplers, or hubs between any CS-SOLO or CS-DUO and the MIX-16/MIX-32. DO NOT connect a CS-SOLO or CS-DUO into an ethernet network. This could cause damage to the personal mixer and will void the warranty.

Categories: CSDUO, CSSOLO, Livemix

While Livemix Data is transmitted over standard network cables, it is not in a format that a network can read. DO NOT use splitters, couplers, or hubs between any CS-SOLO or CS-DUO and the MIX-16/MIX-32. DO NOT connect a CS-SOLO or CS-DUO into an ethernet network. This could cause damage to the personal mixer and will void the warranty.

Shielded cable is required for connecting both the AD-24 and the DA-816 to the MIX-16 or MIX-32. Shielded cable is not required for connecting a CS-SOLO or CS-DUO to the MIX-16/32 or connecting the LM-DANTE card to the Dante network. However, shielded is recommended.

Categories: CSDUO, CSSOLO, Livemix

At this time any single Livemix channel is a mono channel.  However, Livemix offers 5 groups and the ability to group stereo pairs. This means you get true stereo panning and up to 12 Stereo Groups.

Categories: CSDUO, CSSOLO, Livemix

Livemix has 5 multi-channel groups, one of which is controlled with the Me Knob, and up to 12 stereo “group” links. Using this feature, you can group two channels (Stereo Keys, Guitar, Tracks) but because it only groups the volume, you can still have the ability to use the full stereo field.

Categories: CSDUO, CSSOLO, Livemix

At this time, the reverb feature is applied to the Master Output and cannot be removed from a specific channel.

Categories: CSDUO, CSSOLO, Livemix, MIX16, MIX32

Livemix is able to select up to 24 channels from any of the available channels on the Dante network.

Categories: CSDUO, CSSOLO, Livemix, MIX16, MIX32

Livemix supports up to 24 input channels and provides 4 additional accessory channels (Ambient Mic, Intercom, Aux Input, and Metronome).

Categories: CSDUO, CSSOLO, Livemix

Livemix has 5 multi-channel groups, one of which is controlled with the Me Knob. These groups can contain any number of channels. Livemix also supports stereo pairs. Adjacent channels can be grouped into stereo pairs for easy volume adjustments for stereo channels like keyboards and tracks.

Categories: CSDUO, CSSOLO, Livemix

To remove the passcode, PRESS the ME Knob for three seconds on any screen that prompts you to enter the passcode. After three seconds, release the ME Knob and PRESS and hold it for three seconds more. The passcode removal screen will appear. SELECT Yes to reboot the system, removing passcode protection.

Categories: CSDUO, CSSOLO, Livemix

Livemix is designed to work with a large variety of impedances. It can drive standard in-ear monitor impedances (generally 11Ω to 75Ω) up to 300Ω headphones.

Categories: Cables, CSDUO, CSSOLO, Livemix, MIX16, MIX32

Each MIX-16/MIX-32 Control Surface port supports a maximum combined CAT5e (shielded recommended) cable distance of 100 meters.

Categories: CSDUO, CSSOLO, Livemix

Because Livemix was designed to be volunteer friendly and easy to use, setting up effects for each channel can be done globally from one personal mixer. Setting up EQ and compression on 24 channels for every person on stage would be a nightmare (with the MIX-32 that would be 768 channels). With global effects, each channel can be optimized to fit in a mix perfectly so that each performer just needs to adjust volume and pan.

Categories: CSDUO, CSSOLO, Livemix

Livemix auto saves settings and mixes to a temparary location every 2 minutes. If you make an adjustment and power down without saving before it has a chance to auto save, you will lose your changes. It is recommended to always save a mix or global template when changes are made.

Categories: CSDUO, CSSOLO, Livemix

Through many years of working with worship teams, volunteers, and live bands, we have found that most musicians are not used to mixing multiple channels. We designed Livemix with this in mind. Additionally, it is much easier to offer help to another performer (or use MirrorMix®) when the channels are in the same locations from personal mixer to personal mixer.

QUESTIONS ABOUT LIVEMIX?

This brochure is a great place to start. Not only does it have a comparison of Livemix vs. other personal monitor systems, it also has great articles on the benefits of personal monitors and how to make a great personal monitor mix.

OTHER LIVEMIX PRODUCTS

Digital Audio Labs Resources, Training, Blogs
Product Support
Digital Audio Labs Dealers and Demos
Digital Audio Labs contact page
Back To Top