How do we get the reverb off the click?
At this time, the reverb feature is applied to the Master Output and cannot be removed from a specific channel.
At this time, the reverb feature is applied to the Master Output and cannot be removed from a specific channel.
Livemix has 5 multi-channel groups, one of which is controlled with the Me Knob. These groups can contain any number of channels. Livemix also supports stereo pairs. Adjacent channels can be grouped into stereo pairs for easy volume adjustments for…
The AD-24 can take your input signal via TRS or DB-25. The inputs are pass-through, so you can send your audio to the AD- 24 via DB-25, and back out through the TRS if required.
Livemix supports up to 24 input channels and provides 4 additional accessory channels (Ambient Mic, Intercom, Aux Input, and Metronome).
While Livemix Data is transmitted over standard network cables, it is not in a format that a network can read. DO NOT use splitters, couplers, or hubs between any CS-SOLO or CS-DUO and the MIX-16/MIX-32. DO NOT connect a CS-SOLO…
The MIX-16 supports 16 personal mixes but has up to 24 channels.
A switch is not required for a Dante Network. You can connect the LM-DANTE card directly to the Dante output of the console. It is recommended that if you use a switch, you adhere to the Audinate requirements for a…
The MIX-32 supports 32 personal mixes and up to 24 channels.
While Livemix Data is transmitted over standard network cables, it is not in a format that a network can read. DO NOT use splitters, couplers, or hubs between any CS-SOLO or CS-DUO and the MIX-16/MIX-32. DO NOT connect a CS-SOLO…