Does the MIX-16 have 16 channels?
The MIX-16 supports 16 personal mixes but has up to 24 channels.
MIX-16 and MIX-32 distributor, mixer unit for Livemix personal monitor system and personal mixer system.
Can I lock out features?
Livemix has a passcode feature for protecting certain settings. The passcode can lock out the Global Effects (channel EQ, Dynamics and HPF), Global Configuration (all global features including Global Templates), and Global MirrorMix®.
What is the maximum cable length from the MIX-16 or MIX-32 to a CS-DUO or CS-SOLO?
Each MIX-16/MIX-32 Control Surface port supports a maximum combined CAT5e (shielded recommended) cable distance of 100 meters.
What is the maximum cable length from the AD-24 to the MIX-16 or MIX-32?
The maximum supported CAT5e (shielded required) cable distance of 100 meters.
What is the maximum cable length from the MIX-16 or MIX-32 to a DA-816?
The maximum supported CAT5e (shielded required) cable distance of 100 meters.
Do I need to use shielded cables?
Shielded cable is required for connecting both the AD-24 and the DA-816 to the MIX-16 or MIX-32. Shielded cable is not required for connecting a CS-SOLO or CS-DUO to the MIX-16/32 or connecting the LM-DANTE card to the Dante network.…
What device should be the master clock?
We recommend to make the Master clock the console or Dante card in the console. NOTE: There are two ways this can be done. 1) Set the console's internal clock as Master, then using Dante Controller, set the console's Dante…
Should I select Sync to External?
You will need to select Sync to External if the word clock on our console is not set to slave or if you are using any other clock source. i.e Madi, AES50 etc.
Why does Livemix only run 48Khz?
48kHz has long been the standard for network audio, offering the combination of the most compatibility, fidelity and throughput.