Does Livemix support 96K?
With the LM-DANTE-EXP2 option card, Livemix supports Dante network sample rates up to 96K.
Do I need to use the Dante Controller?
As of Livemix version 4.0, the Dante Controller is required for setting up Livemix on the Dante Network. Versions prior to 2.15 do not require the Dante Controller, although it's use is recommended. You will also need to use Dante…
Does Livemix work with AES67?
AES67 is an interoperability protocol that promises the ability to share digital audio from non-compatible networks. As Dante is compatible with AES67, an AES67 network is possible but we do not offer support for creating an AES67 network.
Do I need a switch for the Dante network?
A switch is not required for a Dante Network. You can connect the LM-DANTE card directly to the Dante output of the console. It is recommended that if you use a switch, you adhere to the Audinate requirements for a…
Should I select Sync to External?
You will need to select Sync to External if the word clock on our console is not set to slave or if you are using any other clock source. i.e Madi, AES50 etc.
What device should be the master clock?
We recommend to make the Master clock the console or Dante card in the console. NOTE: There are two ways this can be done. 1) Set the console's internal clock as Master, then using Dante Controller, set the console's Dante…