AES67 is an interoperability protocol that promises the ability to share digital audio from non-compatible networks. As Dante is compatible with AES67, an AES67 network is possible but we do not offer support for creating an AES67 network.
Livemix operates at 24-bit digital mixing and processing.
Each MIX-16/MIX-32 Control Surface port supports a maximum combined CAT5e (shielded recommended) cable distance of 100 meters.
The maximum supported CAT5e (shielded required) cable distance of 100 meters.
The maximum supported CAT5e (shielded required) cable distance of 100 meters.
Shielded cable is required for connecting both the AD-24 and the DA-816 to the MIX-16 or MIX-32. Shielded cable is not required for connecting a CS-SOLO or CS-DUO to the MIX-16/32 or connecting the LM-DANTE card to the Dante network.…
We recommend to make the Master clock the console or Dante card in the console. NOTE: There are two ways this can be done. 1) Set the console's internal clock as Master, then using Dante Controller, set the console's Dante…
You will need to select Sync to External if the word clock on our console is not set to slave or if you are using any other clock source. i.e Madi, AES50 etc.
48kHz has long been the standard for network audio, offering the combination of the most compatibility, fidelity and throughput.