Welcome to our support page. Here you will find all the User Guides, Manuals, Specification Sheets, Firmware Updates and Downloads for Digital Audio Labs products. The best way to stay up to date on new products and product features is through our mailing list here.
Please let us know if you have any questions that are not answered here.
Only the LM-DANTE-EXP is updatable at this time. The LM-DANTE-EXP has a single network port on the back.
FREQUENTLY ASKED QUESTIONS
Shielded cable is required for connecting both the AD-24 and the DA-816 to the MIX-16 or MIX-32. Shielded cable is not required for connecting a CS-SOLO or CS-DUO to the MIX-16/32 or connecting the LM-DANTE card to the Dante network. However, shielded is recommended.
Livemix works with either analog or digital (Dante) input. With the AD-24 analog input unit you can connect TRS or DB25 connectors from your console or recording interface. For a Digital connection with Dante, plug directly into a switch. For other digital formats (MADI), you may need a format converter.
We recommend to make the Master clock the console or Dante card in the console. NOTE: There are two ways this can be done. 1) Set the console’s internal clock as Master, then using Dante Controller, set the console’s Dante card as Master clock (for the Dante Network) and also check box “Sync to External”. This will allow the card to stay synched to the console’s master clock. 2) Set the console’s internal clock to be slave of the console’s Dante card. Using Dante controller, set the console’s Dante card as Master clock.
Please note, these drivers are no longer supported. They are provided as a courtesy for our legacy customers.
* Beta drivers provided for experimental use only.