The MIX-16 is the central mixer for the Livemix personal monitor system. The MIX-16 supplies mix streams as well as power to each of the connected personal mixers.
The MIX-16 will generally be placed near the personal mixers, likely in a rack near the stage. The MIX-16 receives input data over a network cable, either from the AD-24 (shielded) or a Dante network via the LM-DANTE-EXP Dante card.
Each port on the MIX-16 supports two discrete personal monitor mixes. Connect a single CS-DUO or up to two CS-SOLOs to each port with standard network cable. Maximum combined CAT5e cable (shielded or unshielded) distance is 100 meters.
|Max Cable Length
|100m CAT5e cable (shielded recommended)|
|Max Cable Length
|100m CAT5e cable (shielded required)|
|Bit Rate||24-bit Digital Mixing and Processing|
|Sample Rate||48 kHz internal system rate
Up to 96kHz sample rate input accepted from Dante network
|Digital Format||Proprietary in system|
|Expansion||Option Card Slot|
As of Livemix version 4.0, the Dante Controller is required for setting up Livemix on the Dante Network. Versions prior to 2.15 do not require the Dante Controller, although it’s use is recommended. You will also need to use Dante Controller to set the Master Clock for the Dante Network. See the LM-DANTE User Guide pg. 8 for assigning Dante Channels.
We recommend to make the Master clock the console or Dante card in the console. NOTE: There are two ways this can be done. 1) Set the console’s internal clock as Master, then using Dante Controller, set the console’s Dante card as Master clock (for the Dante Network) and also check box “Sync to External”. This will allow the card to stay synched to the console’s master clock. 2) Set the console’s internal clock to be slave of the console’s Dante card. Using Dante controller, set the console’s Dante card as Master clock.